规格
|
品级 |
Si不小于（％） |
化学成分 ( 最多% ) |
|||
|
Fe（％max） |
Al（％max） |
Ca（％max） |
P（％max） |
||
|
#2202 |
99 |
0.2 |
0.2 |
0.02 |
40ppm |
| #2203 | 99 |
0.2 |
0.2 |
0.03 |
100ppm |
| #3303 | 99 |
0.3 |
0.3 |
0.03 |
- |
| #3305 | 99 |
0.3 |
0.3 |
0.05 |
- |
| #331 | 99 |
0.3 |
0.3 |
0.1 |
- |
|
#441 |
99 |
0.4 |
0.4 |
0.1 |
- |
| #553 | 98.5 |
0.5 |
0.5 |
0.3 |
- |
|
粒度 |
10-100毫米 90%以上或由买方选择。 |
||||
包装：塑料编织袋装，每袋净重1吨。
一、铜及铜合金化学成份
|
Classific- ation |
Designa- tion |
Chemical Composition(%) |
Related Standards | |||||||||||||
| Cu | P | Bi | Sb | As | Fe | Ni | Pb | Sn | O | Zn | ASTM | BS | DIN | JIS | ||
|
Pur Copper |
T2 | 99.9min(inclu Ag) |
-
- |
0.001 max | 0.002 max | 0.002 max | 0.005 max | 0.005 max | 0.005 max | 0.002 max | 0.06 max | 0.005 max | C11000 | C101 | R-Cu57 | C1100 |
| T3 | 99.7min(inclu Ag) | - | 0.002 max | 0.005 max | 0.01 max | 0.05 max | 0.2 max | 0.01 max | 0.05 max | 0.1 max | - | |||||
|
Phosphorus Deoxidized Copper |
TP1 | 99.90min | 0.005-0.012 | 0.002 max | 0.002 max | 0.002 max | 0.01 max | 0.005 max | 0.005 max | 0.002 max | 0.01 max | 0.005 max | C12000 | |||
| TP2 | 99.85min | 0.013-0.050 | 0.002 max | 0.002 max | 0.005 max | 0.05 max | 0.01 max | 0.005 max | 0.01 max | 0.01 max | - | C12200 | C106 | SF-Cu | C1220 | |
|
Brass |
H70 | 68.50-71.50 | 0.01 max | 0.002 max | 0.005 max | - | 0.10 max | - | 0.03 max | - | - | Rem | C26000 | CZ106 | CuZn30 | C2600 |
| H68 | 67.00-70.00 | 0.01 max | 0.002 max | 0.005 max | - | 0.10 max | - | 0.03 max | - | - | Rem | C26200 | ||||
| H65 | 63.50-68.00 | 0.01 max | 0.002 max | 0.005 max | - | 0.10 max | - | 0.03 max | - | - | Rem | C27000 | CZ107 | CuZn36 | C2680 | |
| H63 | 62.00-65.00 | 0.01 max | 0.002 max | 0.005 max | - | 0.15 max | - | 0.08 max | - | - | Rem | C27200 | CZ108 | CuZn37 | C2720 | |
| H62 | 60.50-63.50 | 0.01 max | 0.002 max | 0.005 max | - | 0.15 max | - | 0.08 max | - | - | Rem | |||||
| HPb59-1 | 57.00-60.00 | 0.02 max | 0.003 max | 0.01 max | Al 0.20 max | 0.50 max | 0.8-1.90 | - | - | Rem | C37800 | CZ122 | CuZn39pb2 | C3710 | ||
| HSn70-1 | 69.00-71.00 | 0.01 max | 0.002 max | 0.005 max | - | 0.10 max | - | 0.05 max | 0.80-1.30 | - | Rem | C44300 | CZ111 | CuZnSn | C4430 | |
|
Bronze |
QSn4-3 | Rem | 0.03 max | 0.002 max | 0.002 max | Al 0.002 max | 0.05 max | 0.02 max | 3.50-4.50 | - | Si 0.002 max | C51100 | PB101 | CuSn4 | C5111 | |
| QSn6.5-0.1 | Rem | 0.10-0.25 | 0.002 max | 0.002 max | Al 0.002 max | 0.05 max | 0.02 max | 6.00-7.00 | - | Si 0.002 max | C51900 | PB103 | CuSn6 | C5191 | ||
| QSn6.5-0.4 | Rem | 0.26-0.40 | 0.002 max | 0.002 max | Al 0.002 max | 0.02 max | 0.02 max | 6.00-7.00 | - | Si 0.002 max | ||||||
| QSn7-0.2 | Rem | 0.10-0.25 | 0.002 max | 0.002 max | Al 0.002 max | 0.05 max | 0.02 max | 6.00-8.00 | - | Si 0.02 max | ||||||
二、产品规格
1、管线规格
|
Classification |
Outside Diameter(mm) | Wall Thickness(mm) | Length(mm) | Temper |
|
Pure Copper |
3-95 |
0.3-15 |
In straight:<6,000 Incoil:6,000-20,000 |
Soft,Half Hard,Hard |
|
Phosphorus Deoxidized Copper |
3-95 |
0.3-15 |
In straight:<6,000 Incoil:6,000-20,000 |
Soft,Half Hard,Hard |
|
Brass |
3-70 |
0.2-15 |
In straight:<6,000 |
Soft,Half Hard,Hard |
|
Bronze |
16-45 |
2.5-5 |
In straight:<6,000 |
Soft,Half Hard,Hard |
2、棒线材料规格
|
Classification |
Diameter(mm) | Length(mm) | Temper |
|
Pure Copper |
0.1-95 |
Rods/Bars:<6,000 |
Soft,Half Hard,Hard |
|
Phosphorus Deoxidized Copper |
0.1-95 |
Rods/Bars:<6,000 |
Soft,Half Hard,Hard |
|
Brass |
0.1-70 |
Rods/Bars:<6,000 |
Soft,Half Hard,Hard |
|
Bronze |
0.1-70 |
Rods/Bars:<6,000 |
Soft,Half Hard,Hard |
3、板带材规格
|
Classification |
Hot-rolled (mm) | Cold-rolled (mm) | ||||
| Thickness | Width | Length | Thickness | Width | Length | |
|
Pure Copper |
6-25 |
200-3,000 |
600-3,000 |
0.2-10 |
300-2,500 |
600-3,000 |
|
Phosphorus Deoxidized Copper |
6-25 |
200-3,000 |
600-3,000 |
0.2-10 | 300-2,500 |
600-3,000 |
|
Brass |
6-25 |
200-2,500 |
600-3,000 |
0.2-10 | 300-2,000 |
600-3,000 |
|
Bronze |
6-15 |
600-1,000 |
600-2,000 |
0.4-10 | 300-1,000 |
600-2,000 |
4、异型材规格
Size of Sections/Profiles
These series of products are available in accordance with the customers requirments.Please advise details of the specifications attached with your illustrations.